Current Channels that are Wide open

[Tech07]

Going to use this thread to report Channles that may be Wide open for all receivers from time to time.

Please keep in mind that some channels will only be available to those in the Foot Print Area.

As of September 2010 currently stillup are:

Channels 387 to 392 DN 119W

387 - AO VIVO - Brazilian - on 119W - TP Freq: 12516
388 - AO VIVO - Brazilian - on 119W - TP Freq: 12297
389 - ..............Dish Info - on 119W - TP Freq: 12516
390 - ............. Dish Info - on 119W - TP Freq: 12326
391 - ............. Dish Info - on 119W - TP Freq: 12443
392 - Sony Movie Channel - on 119W - TP Freq: 12355

[Tech07]

with the Exception of 389 to 391 the others are now Encrypted.

[Tech07]

This is a very old Thread but found more Open Channels. Aside from CH 101 on Sat 119W which we use for testing purposes A few are up.



Checking CH 102 - Free Preview CHannel it indicates the following

CH 113 COOKING CHANNEL 4/28 to 5/31

CH 126 BABY 5/12 to 5/16

CH 130 AMC 3/30 to 5/31

So these should be up till the end Dates

[Tech07]

Thre more wide open Channels for all Receivers but you need to set up these Channels with Video, Audio and PVR Pids

6760 WUTR (ABC - Utica)
6762 WKTV (NBC - Utica)
6763 WFXV (Fox - Utica)

If you do not have these channels then you must edit the Pids for each of these and rescan the TP

3 unencrypted SD locals on 12530L 20000 7/8 regular DVB on the 110W DN sat.

Utica NY. NBC, FOX and ABC.
They may not scan in for you. If this is the case then you MUST enter the following PIDS for them to work!

Vid 4130 Aud 4131 PCR 4130 > WUTR (ABC - Utica) 6760
Vid 4386 Aud 4387 PCR 4386 > WKTV (NBC - Utica) 6762
Vid 4642 Aud 4643 PCR 4642 > WFXV (Fox - Utica) 6763


These locals are on CONUS and not spotbeams so they will work for everyone who has access to the 110 sat.

Pids are entered differently for each receiver.

For the SV8000:

Menu>Dish Setting>110W>Transponder:12530>ADD PIDs>Scan TP

If you need help please start your own threads for the Models that you test, do not ask for help in this Thread

Thank yopu